我的主页      中南大学      粉末冶金研究院      
浏览次数:3238    |   登录   |   English
陈 超
个人简介

职员姓名:

陈超

职员性别:

出生日期:

1986-01-01

部门岗位:

功能材料研究所

聘任职称:

副教授

是否导师:

博士生导师

个人简介:

陈超

联系方式:pkhqchenchao@126.com

中南大学“升华猎英计划”入选者,湖南省生物材料学会骨修复材料与器械青委会委员。2009年在中南大学材料科学与工程学院获学士学位,2014年在清华大学材料学院获博士学位,主要研究方向为增材制造(3D打印)专用合金成分设计、粉末冶金材料微结构表征、介电/压电/铁电功能材料,作为子课题负责人承担“十三五”国家重点研发计划2项,主持国家自然科学基金青年项目1项、湖南省重点研发计划子课题1项、湖南省自然科学基金1项、中国博士后基金面上项目1项,在 Adv. Mater.Appl. Phys. Lett.等期刊发表学术论文70余篇,被引2000余次,在科学出版社出版专著一部(《阻变存储器材料与器件》),在化学工业出版社出版教材一部(《X射线衍射技术》),获国家发明专利授权6项,获省部级二等奖1项。 


教育经历
2009/09-2014/01 清华大学材料学院,博士,导师:潘峰
2005/09-2009/06 中南大学材料科学与工程学院, 学士
工作经历

2018/09-至今      中南大学粉末冶金研究院,副教授

2016/03-2018/08   中南大学粉末冶金研究院,特聘副研究员
2015/07-2017/07   中南大学粉末冶金研究院,博士后,导师:周科朝

科研方向
增材制造(3D打印)、有色金属微结构调控与表征
学术成果

承担项目

1.2017/07-2020/06,国家重点研发计划课题,3D打印用钨钼难熔金属及预合金粉末制备技术(2017YFB0305803);

2.2017/07-2020/12,国家重点研发计划课题,铝合金粉末3D打印构件缺陷抑制与形/性协同调控技术(2017YFB0306305);

3.2017/01-2019/12,国家自然科学基金青年基金项目,变价氧化物基阻变存储器中电导量子化转变机制研究(51602350);

4.2016/08-2019/08,湖南省重点研发计划子课题,钛合金增材制造的致密化行为及界面特征(2016JC2003);

5. 2017/04-2019/06,中国博士后基金面上项目,激光增材制造Ti-Nb-Sn合金的显微组织演变机制(2017M610505);

专著与教材:
1. 《阻变存储器材料与器件》,科学出版社,2014年9月;

2. 《X射线衍射技术》,化学工业出版社,2016年10月;

部分论文列表:
[1]  Ni M, Liu S, Chen C*, Li R, Zhang X, Zhou K. Effect of heat treatment on the microstructural evolution of a precipitation-hardened superalloy produced by selective laser melting. Mater. Sci. Eng. A, 2019, 748:275-285.

[2]  Chen W, Li C, Zhang X, Chen C*, Lin Y C, Zhou K. Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy. J. Alloys Compd., 2019, 783:709-717.

[3]  Tang L, Chen C*, Wei A, Li K, Zhang D, Zhou K. Regulating crystal structure and ferroelectricity in Sr doped HfO2 thin films fabricated by metallo-organic decomposition. Ceram. Int., 2019, 45:3140-3147.

[4]  Chen W, Chen C*, Zi X H, Cheng X F, Zhang X Y, Lin Y C, Zhou K C. Controlling the microstructure and mechanical properties of a metastable beta titanium alloy by selective laser melting. Mater. Sci. Eng. A, 2018, 726:240-250.

[5]  Zi X, Chen C*, Wang X, Wang P, Zhang X, Zhou K. Spheroidisation of tungsten powder by radio frequency plasma for selective laser melting. Mater. Sci. Technol., 2018, 34:735-742.

[6]  Zhang G, Chen C*, Wang X, Wang P, Zhang X, Gan X, Zhou K. Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder. Int. J. Adv. Manuf. Technol., 2018, 96:4223-4230.

[7]  Wei A, Chen C*, Tang L, Zhou K, Zhang D. Chemical solution deposition of ferroelectric Sr:HfO2 film from inorganic salt precursors. J. Alloys Compd., 2018, 731:546-553.

[8]  Peng T, Kellens K, Tang R, Chen C, Chen G. Sustainability of additive manufacturing: An overview on its energy demand and environmental impact. Additive Manufacturing, 2018, 21:694-704.

[9]  Ni M, Chen C*, Wang X, Wang P, Li R, Zhang X, Zhou K. Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing. Mater. Sci. Eng.: A, 2017, 701:344-351.

[10] Chen C, Zhang Y, Zeng J, Zhang F, Zhou K, Bowen C R, Zhang D. Aligned macroporous TiO2/chitosan/reduced graphene oxide (rGO) composites for photocatalytic applications. Appl. Surf. Sci., 2017, 424:170-176.

[11] Chen C, Wei A, Li Y, Zhou K, Zhang D. Improved tunable properties of Co doped Ba0.8Sr0.2TiO3 thin films prepared by sol-gel method. J. Alloys Compd., 2017, 692:204-211.

[12] Luo H, Zhang D, Wang L, Chen C*, Zhou J, Zhou K. Highly enhanced dielectric strength and energy storage density in hydantoin@BaTiO3-P(VDF-HFP) composites with a sandwich-structure. RSC Adv., 2015, 5:52809-52816.

[13] Luo H, Zhang D, Jiang C, Yuan X, Chen C*, Zhou K. Improved dielectric properties and energy storage density of poly(vinylidene fluoride-co-hexafluoropropylene) nanocomposite with hydantoin epoxy resin coated BaTiO3. ACS Appl. Mater. Interfaces, 2015, 7:8061-8069.

[14] Chen C, Zhuang H, Zhu X, Zhou K, Zhang D. Enhancement of relaxor properties by Nb doping in Ba0.8Sr0.12Ca0.08TiO3 lead-free ferroelectric ceramics. Ceram. Int., 2015, 41:9893-9898.

[15] Chen C, Zhuang H, Zhu X, Zhang D, Zhou K, Yan H. Effect of Ca substitution sites on dielectric properties and relaxor behavior of Ca doped barium strontium titanate ceramics. J. Mater. Sci.-Mater. Electron., 2015, 26:2486-2492.

[16] Wang Y, Zhou X, Song C, Yan Y, Zhou S, Wang G, Chen C, Zeng F, Pan F. Electrical control of the exchange spring in antiferromagnetic metals. Adv. Mater., 2015, 27:3196-3201.

[17] Pan F, Gao S, Chen C, Song C, Zeng F. Recent progress in resistive random access memories: materials, switching mechanisms, and performance. Mater. Sci. Eng. R-Rep., 2014, 83:1-59.

[18] Han J, Song C, Gao S, Wang Y, Chen C, Pan F. Realization of the meminductor. ACS Nano, 2014, 8:10043-10047.

[19] Chen C, Gao S, Zeng F, Wang G, Li S, Song C, Pan F. Conductance quantization in oxygen-anion-migration-based resistive switching memory devices. Appl. Phys. Lett., 2013, 103:043510.

[20] Chen C, Gao S, Tang G, Fu H, Wang G, Song C, Zeng F, Pan F. Effect of electrode materials on AlN-based bipolar and complementary resistive switching. ACS Appl. Mater. Interfaces, 2013, 5:1793-1799.