我的主页      中南大学      粉末冶金研究院      
浏览次数:4270    |   登录   |   English
李云平
个人简介

职员姓名:

李云平

职员性别:

出生日期:

 

部门岗位:

高温结构材料研究所

聘任职称:

正高职称

是否导师:

博士生导师

个人简介:

个人介绍:

日本东京大学材料学博士,中南大学“升华学者”特聘教授、博士生导师,日本东北大学金属材料研究所客座教授。2007年于东京大学博士毕业后,先后在日本东北大学金属材料研究所(200711月~201412)和中南大学从事镍基高温合金、钴合金以及高强耐蚀合金的设计及加工等方面的研究。在Nature子刊NGP Asia MaterActa MaterElectrochimica ActaCorros Sci等国际高水平期刊上发表学术论文150余篇;出版专著4部;申请及授权国家发明专利20余项。

电话:13807499012

邮箱:lyping@csu.edu.c  n

主持科研项目

国家自然科学基金面上项目,2019-2023

两机专项,2018-2022 

十三五装备预先研究项目,2018-2021年

湖南省杰出青年基金 2016-2018年

教育经历

2004年4月~2007年3月 东京大学  工学部研究科 材料工学博士

1997年9月~2000年2月 中南大学  粉末冶金研究院 材料学硕士

1993年9月~1997年6月 中南大学  粉末冶金研究院 工学学士

工作经历

2016年7月~至今  日本东北大学 客座教授

2017年11月~至今 中南大学粉末冶金研究院 高温合金研究所 升华特聘教授

2014年12月~2017年10月 中南大学材料科学与工程学院 升华特聘教授

2009年4月~2014年11月 日本东北大学金属材料研究所 助理教授

2007年11月~2009年3月日本东北大学金属材料研究所 博士后研究员

2007年4月~2007年10月日本东京大学大学院工学系研究科 外国人特别研究员

2003年10月~2007年3月日本东京大学大学院工学系研究科 博士研究生

科研方向
合金设计与加工、高性能粉末冶金材料、特种粉末开发、高强高导铜合金、高温合金、耐蚀合金
讲授课程
X射线衍射
学术成果

代表性论文

1. Xiaojuan Gong,Yunping Li*, Yan Nie, Zaiwang Huang, Feng Liu, Lan Huang, Liang Jiang, Corrosion behaviour of Co-28Cr-6Mo alloy fabricated by electron beam melting,Corros Sci, 139 (2018) 68-75.

2. Yujie Cui,Yunping Li*, Zhongchang Wang, Yuichiro Koizumi, Akihiko Chiba, Regulating twin boundary mobility by annealing in magnesium and its alloys,Inter J Plast, 99 (2017) 1-18.

3. Xiaojuan Gong, Yujie Cui, Daixiu Wei, Bin Liu, Ruiping Liu, Yan Nie,Yunping Li*, Building Direction Dependence of Corrosion Behaviour of Ti-6Al-4V Alloy Fabricated by Electron Beam Melting,Corros Sci, 127(2017) 101-109.

4. Yan Chen,Yunping Li*, Yuichiro Koizumi, Hani Haider, Akihiko Chiba, Effects of carbon addition on wear mechanisms of CoCrMo metal-on-metal hip joint bearings,Mater Sci Eng C, 76(2017) 997-1004. 

5. Yujie Cui,Yunping Li*, Zhongchang Wang, Xiao Ding, Yuichiro Koizumi, Huakang Bian, Liyang Lin, Akihiko Chiba, Impact of solute elements on detwinning in magnesium and its alloys,Inter J Plast, 91(2017) 134-159.

6. Jiaxiang Li,Yunping Li*, Zhongchang Wang, Huakang Bian, Yuhang Hou, Fenglin Wang, Guofu Xu, Bin Liu, Yong Liu, Ultrahigh Oxidation Resistance and High Electrical Conductivity in Copper-Silver Powder,Scientific Report,6(2016), 39650.

7. HuakangBian,Xiandong Xu,Yunping Li*,Yuichiro Koizumi, Zhongchang Wang, Mingwei Chen,Kenta Yamanaka, Akihiko Chiba,Regulating theγ’ growth in superalloys,NPG Asia Materials,7(2015);e212.(Nature子刊)

8. Yuhang Hou,Yunping Li*, Chen Zhang, Akihiko Chiba,Influence of Mo concentration on corrosionresistanceto HF acid solution of Ni–Co–Cr–Mo alloys with and without Cu,Corros Sci, 99(2015) 185-193.

9. Phacharaphon Tunthawiroon,Yunping Li*, Akihiko Chiba,Influences of alloyed Si on thecorrosionresistanceof Co–Cr–Mo alloy to molten Al by iso-thermal oxidation in air,Corros Sci, 100(2015) 428-434.

10.Yunping Li*,XiandongXu, Chen Zhang, Yuhang Hou, Akihiko Chiba, Regulating the Passive Film of NiCoCrMo Alloy in Hydrofluoric Acid Solution by Small Addition of Cu,Corros Sci, 98(2015) 119-127.

11. Phacharaphon Tunthawiroon,Yunping Li*, Ning Tang, Akihiko Chiba,Effects of alloyed Si on the oxidation behaviour of Co–29Cr–6Mo alloy for solid-oxide fuel cell interconnects,Corros Sci, 95(2015), 88-99.

12. Yujie Cui,Yunping Li*, Shihai Sun, Huakang Bian, Hua Huang, Zhongchang Wang, YuichiroKoizumi, Akihiko Chiba, Enhanced Damping Capacity of Magnesium Alloys by Tensile Twin Boundaries,Scripta Mater, 108 (2015) 8-11.

13. Yuhang Hou,Yunping Li*, Chen Zhang, Akihiko Chiba,Ex-situ observation on the dissolution behaviour of Ni–16Cr–15Mo and Ni–30Co–16Cr–15Mo alloys in hydrofluoric acid,Corros Sci, 90(2015), 133-139.

14. Yuhang Hou,Yunping Li*, Chen Zhang, Yuichiro Koizumi, Akihiko Chiba,Effects of cold working on corrosion resistance of Co-modified Ni–16Cr–15Mo alloy in hydrofluoric acid solution,Corros Sci, 89(2014), 258-267.

15. Chen Zhang,Yunping Li*, Yuhang Hou, Yuichiro Koizumi, Akihiko Chiba,Corrosionresistanceof Cu- and Fe-modified Ni–30Co–16Cr–15Mo alloy in aqueous hydrofluoric acid,Corros Sci, 89(2014), 81-92.

16.Yunping Li, Phacharaphon Tunthawiroon, Ning Tang, Yuichiro Koizumi, Akihiko Chiba,Effects of Al, Ti, and Zr doping on oxide film formation in Co–29Cr–6Mo alloy used as mould material for Al die-casting,Corros Sci, 84(2014), 147-158.

17.Yunping Li, Peng Li,Huakang Bian, Ning Tang, Yuichiro Koizumi, Akihiko Chiba,The hotforgingbehaviour and its effects on the oxidation behaviour of W–Cr alloy,Corros Sci,83(2014), 367–374.

18. NingTang,Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba, Effect of Nitridation Treatment on Corrosion behavior of Co–Cr–Mo alloy in liquid Al,Corros Sci, 78(2014), 244-250.

19. Xiaoqing Zhang,Yunping Li*, Ning Tang, Emi Onodera, Akihiko Chiba, Corrosion behavior of CoCrMo alloys in 2 wt% sulphuric acid solution,ElectrochimicaActa, 125(2014), 543-555.

20.Yunping Li, Xiuru Fan, Ning Tang, Yuichiro Koizumi, Akihiko Chiba,Effects of Partially Substituting Cobalt for Nickel on the Corrosion Resistance of a Ni-Cr-Mo Alloy to Aqueous Hydrofluoric Acid,Corros Sci, 78(2014), 101-110.

21. Yuren Wen,Yunping Li, Akihiko Hirata, Yi Zhang, Takesi Fujita, Tadashi Furuhara, C. T. Liu, AkihikoChiba, Mingwei Chen, Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation strengthened ferritic alloysActa Mater, 61(2013), 7726-7740.

22.YunpingLi, Shuo Wu, Huakang Bian, Ning Tang, Bin Liu, Yuichiro Koizumi, Akihiko Chiba, GrainRefinementdue to Complex Twin Formations in Rapid Hot Forging of Magnesium Alloy,Scripta Mater, 68(2013), 171–174.

23. PhacharaphonTunthawiroon,Yunping Li*, Ning Tang, Akihiko Chiba,Enhancement of Corrosion Resistance of Fe-Cr-Mo alloy to Molten Al by Thermal Oxidation in AirCorros Sci,77(2013), 97-102.

24. NingTang,Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba, Interfacial reaction between Co-Cr-Mo alloy and liquid Al,Corros Sci, 75(2013), 262–268.

25.Yunping Li,NingTang, Phacharaphon Tunthawiroonb, Yuichiro Koizumi, Akihiko Chiba, Characterisation of oxide films formed on Co–29Cr–6Mo alloy used in die-casting moulds for aluminium,Corros Sci, 73(2013), 72–79.

26. Ning Tang,Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba, Experimental andtheoreticalstudy on interfacial reaction of solid Co with liquid Al,Corros Sci, 73(2013), 54–61.

27. NingTang,Yunping Li*, Shingo Kurosu, Yuichiro Koizumi, H. Matsumoto, Akihiko Chiba,Interfacial reactions of solid Co and solid Fe with liquid Al,Corros Sci,60(2012),32-37.

28. Ning Tang,Yunping Li*, Shingo Kurosu, Hiroaki Matsumoto, Yuichiro Koizumi, Akihiko Chiba,Interfacialreactions between molten Al and a Co–Cr–Mo alloy with and withoutoxidation treatment,Corros Sci,53(2011),4324-4326.